17
Chapter 2: Motherboard Installation
Follow the steps below to install an AGP/CNR/PCI expansion card.
1. Locate the AGP, CNR or PCI slots on the mainboard.
2. Remove the blanking plate of the slot from the system chassis.
3. Install the edge connector of the expansion card into the slot. Ensure the
edge connector is correctly seated in the slot.
4. Secure the metal bracket of the card to the system chassis with a screw.
8X AGP Slot
You can install a graphics adapter that supports the 8X AGP specification and
has a 8X AGP edge connector in the AGP slot.
CNR Slot
You can install the CNR (Communications and Networking Riser) cards in this
slot, including LAN, Modem, and Audio functions.
PCI Slots
You can install the 32-bit PCI interface expansion cards in the slots.
