11
Chapter 2: Motherboard Installation
Connect the power connector from the power supply to the
PWR1
connector on
the motherboard.
PWR2
is a +12V connecotr for CPU Vcore power.
If there is a cooling fan installed in the system chassis, connect the cable from the
cooling fan to the
FAN1
fan power connector on the motherboard.
Connect the case switches and indicator LEDs to the
PANEL1
header.
Install the motherboard in a case. Follow the case manufacturer’s instructions to
use the hardware and internal mounting points on the chassis.
PWR1
PANEL1
1
FAN1
1
PWR2
Pin
Signal
Pin
Signal
1
HD)
2
FP PWR/SLP(+)
3
HD_LED_N(-)
4
FP PWR/SLP(-)
5
RESET_SW_N(-)
6
POWE)
7
RESE)
8
POWER_SW_N(-)
9
RSVD_DNU
10
KEY
