English
19
Table 2: Error codes
Error code(s) Description
Possible causes and solution(s)
1, 2 , 3
Internal battery charger
problem.
Restart battery charger. If the error is repeated
Consult Your supplier.
4
Temperature too low.
Move to a warmer environment and restart the
charging.
5
Temperature too high
Let the charger cool down for 15 minutes and
restart the charging. If the problem persists
please consult Your supplier.
7
Current too high.
Cabling problem or other problem. Check cabling
and connections and restart. If unsuccessful
consult Your supplier.
If the cause of the failure has been removed, the battery charger can be restarted by
disconnecting and reconnecting the mains .
6. Specifications
>ƉďƋ>&
specifications / model
6A
8A
12A
Supported batteries
Lithium iron phosphate (LiFePO4) 25.6V of 2 x 12.8V
Battery capacity range
12-60Ah
16-80Ah
24-120Ah
Mains voltage
220-240Vac
nominal,
(single phase)
Mains frequency
50/60 Hz
Output voltage range
25.6V nominal, 29.2V maximum charge voltage
Output current range
0.25 – 6A
0.25 – 8A
0.25 – 12A
Maximum output power *
180W
240W
360W
Efficiency
> 90% at full load and 230Vac
Protections
Output voltage , Temperature
Dimensions
210 x 175 x 65mm
Charge status indication
2 LEDs
Use
Indoor use only
Operational temperature range *
0 – 40°C
Storage temperature
-15 - +50°C
Cooling
Passive
Passive
Active (Fan)
Maximum humidity
95% (non condensing)
Safety class
II
Regulations
CE (LVD, EMC, RoHS)
Standards
EN60335-2-29 , EN12184 , ISO7176-14, EN60601-1-2
* At elevated ambient temperatures or if there is no sufficient cooling, the output current
can be reduced.