PAYCHEX Biometric 2500 Mounting Download

Page: 4 / 4

Mounting Your Biometric 2500 or Proximity 2000 Time Clock

Paychex Time and Labor Online

Removing the Time Clock from the Mounting Plate

To remove the time clock from the mounting plate, follow these steps:

Using a flat head screwdriver, remove the black screw in the bottom of the

time clock.

Angle the clock and gently remove it from the mounting plate.

If you have additional questions about mounting your Paychex Time Clock, contact

the Time and Attendance Center at the number listed on the Training page.

Summary of Contents for Biometric 2500

Page 1: ...hex Time and Labor Online 2012 Paychex Inc All rights reserved TLO 4207 120803 1 Mounting Your Biometric 2500 or Proximity 2000 Time Clock Make Sure You Have These Items This instruction sheet Paychex...

Page 2: ...to hold onto the time clock In the case of the Paychex Biometric 2500 time clock placing the terminal at a comfortable height can help reduce fingerprint read errors When mounting your time clock con...

Page 3: ...holes using the four holes provided in the mounting plate 3 Remove the plate from the wall and insert the screw anchors into the set holes 4 Replace the mounting plate over the four holes and using th...

Page 4: ...ing Plate To remove the time clock from the mounting plate follow these steps 1 Using a flat head screwdriver remove the black screw in the bottom of the time clock 2 Angle the clock and gently remove...