Mounting Your Biometric 2500 or Proximity 2000 Time Clock
Paychex Time and Labor Online
© 2012 Paychex, Inc. All rights reserved. TLO-4207-120803
2
Pre-Mounting Considerations
Place the time clock in a location where users are comfortable interacting with
it. Ideally, it should be placed level, about four to five feet above the ground. If
the time clock is placed too high or too low, it may require the user to reach up
or down, most likely causing him to hold onto the time clock. In the case of the
Paychex Biometric 2500 time clock, placing the terminal at a comfortable height
can help reduce fingerprint read errors.
When mounting your time clock, consider the following:
•
Do not place the time clock outdoors without adequate protection from
weather or vandalism.
•
Do not place the time clock under strong light.
•
Use a regulated 12-V dc3A power source for the time clock.
•
The operating temperature for the clock is 0º to 45ºC (32º to 113ºF).
•
The operating humidity for the clock is 20 to 80%.
Mounting Tools Needed
•
Flat head screwdriver
•
Hand drill
Use the drill to make small set holes for the screw anchors.
