PAGE 3
Step 9 - Fitting the rear cover
Present the front lock assembly to the door passing
the wiring harness through the
5
/
8
" hole.
Present the rear lock assembly to the door and join
the two parts together with the two mounting screws.
Step 5 - Mounting on the door
Step 6 - Wiring
Plug the wiring harness into the socket in the rear
lock assembly.
Locate the top of the cover over the housing and push
flush to the door.
Clip in the 4 x AA batteries with reference to the label
displayed below the holder assembly.
Step 8 - Fitting the batteries
Where a contact swich is fitted, connect the wires to
the terminal block provided on the pcb.
Step 7 - Wiring (contact switch option)
Mounting screws are provided in three lengths.
Short - Door width 1
1
/
4
" to 1
3
/
4
"
Med - Door width 1
1
/
2
" to 2"
Long - Door width 1
3
/
4
" to 2
1
/
4
"
