![background image](http://html.mh-extra.com/html/paw/heatbloc-k36/heatbloc-k36_installation-and-operation-instructions-manual_764020011.webp)
4 Assembly and installation [specialist]
2018/02
993203x3x-mub-en – V10
11
1.
Fix the wall bracket to the wall with
appropriate screws and washers.
2.
Take off the thermometer handles
(A-2, G-2) and take the group of
fittings out of the insulation.
3.
Push the insulating back shell
onto the wall bracket.
4.
Insert the clip springs in the lower
ball valves.
5.
Push the group of fittings onto the
wall bracket.
6.
Connect the group of fittings to the
system by pipework. The installation
to the piping must be carried out
without any tension.
7.
Connect the pump.
8.
Carry out the pressure test and
check all thread connections.
9.
Mount the insulating front shells and
the thermometer handles (A-2, G-2).