![background image](http://html.mh-extra.com/html/paw/heatbloc-k33max-dn-25/heatbloc-k33max-dn-25_installation-and-operation-instructions-manual_764027016.webp)
5 Scope of delivery [specialist]
16
99360453x-mub-en – V04
2017/11
4.2
Accessories: Cutting-ring compression fitting (not included in the scope of delivery)
The connection to the heating installation can be carried out fast, pressure-proof and
without soldering if you use the optionally available compression fittings.
Not included in
the scope of delivery!
1.
Push the union nut ② and the cutting ring ③ onto the
copper pipe ①. The pipe must protrude at least 3 mm
from the cutting ring in order to ensure the force
transmission and the sealing.
2.
Insert the support sleeve ④ into the copper pipe.
3.
Insert the copper pipe with the plugged-on individual
parts (②, ③ and ④) as far as possible into the
housing of the compression fitting ⑤.
4.
First, screw the union nut ② m
anually.
5.
Tighten the union nut ② by rotating one full turn.
Secure the housing of the compression fitting ⑤
against distort, in order to avoid damaging the
sealing ring.
5
Scope of delivery [specialist]
NOTICE
Complaints and requests/orders of spare parts will only be processed with information on
the serial number! The serial number is placed on the return pipe of the heating circuit.