Pavone Systems DAT 200, Technical Manual

Page: 40 / 44

Page 38
INPUT DATA AREA
ADDRESS
Description Format Note
Byte Bit
0 0 Not used BYTE
1 0 Center_of_Zero BOOL
1 1 Stable_Weight BOOL
1 2 Zero_Band BOOL
1 3 Tare_entered BOOL
1 4 Under_Load BOOL
1 5 Over_Load BOOL
1 6 Off_Range BOOL
2 0 Gross_Weight DINT
6 0 Net_Weight DINT
10 0 Peak_Weight DINT
14 0 Load_Cell_Capacity DINT
18 0 Load_Cell_Sensitivity INT
20 0 Weight_Division_Value INT
22 0 Weight_Stability_value INT
24 0 Autozero_Set DINT
28 0 Tracking_Factor INT
30 0 Zero_Band INT
32 0 Delta_Weight INT
34 0 Monitor_Register INT
OUTPUT DATA AREA
Address
Description Format Note
Byte Bit
128 0 Data_Register DINT
132 0 Command_Register INT See table B on page 27
134 0 Load_Cell_Capacity DINT
138 0 Load_Cell_Sensitivity INT
140 0 Weight_Division_Value INT See table C on page 27
142 0 Weight filter factor INT
144 0 Weight Stability value INT
146 0 Autozero_Set DINT
150 0 Tracking_Factor INT
152 0 Zero_Band INT
154 0 Delta_Weight INT
192 0 Monitor_Register INT