Page 11
TESTER: CALIBRATOR FUNCTIONS
Suitable for weighing instruments with load cells excitation from +/-3V to +/-15V
Reading and Display of Indicator power supply.
The display allows a complete and clear visualization the signals and their simulated gross or net weight.
CALIBRATOR Function active
Clock and Batteries
Status
mV/V Signal
Increment Signal Key
(+0.1 mV/V)
mV Signal
End of increment Signal
Key (+0.001 mV/V)
Instrument Power supply
Bar graph of the Signal and
Percentage
Weight related to the signal
Note: Set the parameters in
“Weighing Data Menu”
SLOW decreasing Signal Key
(0.001 mV/V)
Zero Key for the di-
splayed weight
FAST decreasing Signal Key
(0.1 mV/V)
Change Function Key: TESTER
/ CALIBRATOR
Average Sensitivity Signal
Simulation (3 mV/V)
Zero Signal Simulation
(0 mV/V )
Access Menu Key
ADJUSTING OUTPUT SIGNAL
The signal adjustment is managed with the cursor keys next to the Bar graph.
By holding the end adjustment keys there is a continuous signal adjustment.
The signal can be reduced to negative values up to -2.8 mV and reach the maximum value of +20.3 mV.
It is possible to manually set a value in the Signal squared box.
The
Key generates the 0 mV/V Signal.
The
Key generates the average Sensitivity Signal of the load cells.
In case this value is not set the default value is 2 mV/V.
Summary of Contents for 1008
Page 2: ...Page II ...
