Page 16
CONFIGURATION FILES MENU
CONFIGURATION FILES:
Management of the transmission and storage of the configuration files set into the LC Tester 1008.
The files are stored in the folder (: \ CONFIG). The file extension is .csv.
Stored parameters are: Number of the Load Cells, Measurement Unit, Division Value, Load Cell Capa-
city, Load Cell Sensitivity, Capacity of the System, Zero Signals, FS Signals, Sample Weight.
• SAVE FILE:
Configuration File Saving (Only possible after selecting a file in the Selected File menu).
• OPEN FILE:
Upload of an existing configuration file (only possible after selecting the file). The
related data can be displayed in the Saved Signals menu.
• FILE SELECTION:
You can select SEARCH FILE or NEW FILE.
Search File:
Allows the automatic search of the file in the memory.
New File:
Creation of a new file that will be saved in the memory.
Note: La selezione di un file già esistente non carica automaticamente la configurazione in
automatico in quanto successivamente è necessario selezionare la voce APRI FILE.
SAVE SIGNALS
This function allows to store the mV / V values coming from each load cell, both at Zero and at a
known weight. Note: These data will be associated to the current configuration file only by performing
the operation: SAVE FILE
Select
to store the mV/V valuesof the weighing system
Select
after the load on the system of a sample weight
and write the weight value loaded.
* STORED SIGNALS:
Visualization of the Zero and F/S values
store in the menu “Load Cells Signals”
Summary of Contents for 1008
Page 2: ...Page II ...
