CRISTAL FM 1/2 OVENS Translated manual N°AF220045170-17
26802 Portes Les Valence – France
144
24
Burner
Page 129
Oil/gas ovens only:
Attach the burner to its mount (no 5) sandwiching the 10 mm thick seal (No. 6)
and the seal supplied with the burner. Connect the elements - see section 3.2
or 3.8.
25
Electrical connections
Page 133, 134
All connectors are fitted with polarizing slots.
E
LECTRIC OVEN
−
Connect the 3 fan motors (A / B and C) to the main electrical cabinet.
The servomotor of the damper actuator (D).
The steam exhaust fan motor (E).
The 16-pin connector (G) of the front panel.
The 16-pin connectors (H) and (I) of the resistor units.
−
Connect the 16-pin connector (F) to the roof distribution box.
−
Install and attach with silicone putty - see § 26
The overheat safety thermostat (J) bulb in the heating unit thermometer
pocket (push right in).
The temperature regulator thermocouple (K) in the heating unit
thermometer pocket (push right in).
IMPORTANT: run the grey cables (19 conductors) through the top side bands
so that they do not come in contact with hot oven parts.
−
Connect the mains to the main electrical cabinet circuit breaker.
