CRISTAL FM 1/2 OVENS Translated manual N°AF220045170-17
141
26800 Portes-Lès-Valence – France
17
Front angles
no. 18 and 19 pageErreur ! Signet non
défini., 121 or 124
Snap the angle onto plinth no. 14 and band no.17, then attach the angle to the
bakelite insulating washers.
Attach the angle to the stainless steel post of the door frame with 3.9x10 sheet
metal screws.
IMPORTANT: Prior to attaching the angle that holds the control panel:
Connect the light connector
Assemble the sensor onto the door frame (adjust to 2mm from the door). For
left-hand control panel, use the 2 extensions supplied.
Insulate the angles with ROCK WOOL (except those with front heat-insulating
sheet) (no.9).
Attach the top bands with M6x16 collar nuts.
18
Inclined pan
no.20 page Erreur ! Signet non défini.,
121 or 124
Attach to the door frame with HM8x20 stainless steel screws, D.8 tooth
lockwasher and Wolfrakot grease.
Make sure the moving pan does not hit the painted external frame (wedge
under the screw if necessary with the washer supplied with it. Check the
alignment with the cross member (make it reach the member).
The inclined pan MUST be fixed to the floor with plastic pins and wood
screws.
P120005627
