HUB REMOTE
TOP HOT SHOE
LOCKING BOTTOM
HOT SHOE
(CAMERA BRAND SPECIFIC)
REAR DISPLAY
POWER BUTTON
SYNC JACK
ROTARY WHEEL
CHARGING PORT
The HUB remote (sold separately) is a new addition to our CyberSync remote system. It provides all of the
necessary communication between the camera and the LINK to trigger the flash unit. While it is camera
specific for usage of TTL and HSS, the HUB will function as a standard trigger similar to our CyberSync
Trigger Transmitter and can be used with any camera brand.
Press and hold the POWER button,
located on the right side of the
HUB, for two seconds.
POWERING THE HUB ON / OFF
POWER BUTTON
Slide the bottom of the HUB onto
your camera’s hot shoe. Turn the
locking wheel clockwise to lock
the HUB on to your camera.
ATTACHING THE HUB TO YOUR CAMERA
LOCKING BOTTOM
HOT SHOE
(CAMERA BRAND SPECIFIC)
REAR DISPLAY
BATTERY INDICATOR
BLUETOOTH
TTL/MAN and HSS
INDICATOR
FREQUENCY
10
By default, BLUETOOTH is ON when the HUB is first activated.
To turn BLUETOOTH ON or OFF, turn the ROTARY WHEEL until BLUETOOTH
appears on the display. Press in on the ROTARY WHEEL to enter the
BLUETOOTH section. Turn the ROTARY WHEEL to toggle between ON and OFF.
Press in on the ROTARY WHEEL to confirm your selection.
BLUETOOTH
(CAMERA BRAND SPECIFIC)
