Paul Agnew Ilektro 1250L, User Instructions And Installation, Page: 17 / 40

17
THE CONFIGURATION OF
THE APPLIANCE MUST BE
COMPLETED BY A QUALIFIED
INSTALLATION TECHNICIAN.
T
HE APPLIANCE COMES FITTED WITH BOTH
A BLANKING PLATE AND A SIDE TRIM.
BY USING A COMBINATION OF THESE PARTS,
THE APPLIANCE CON BE CONFIGURED TO ANY
GLASS ARRANGEMENT
LOCATE THE BLANKING PLATE MOUNTING
SCREWS ON EITHER SIDE OF THE
APPLIANCE. AS SHOW ON THE IMAGE
BELOW.
• REMOVE THE
7
SCREWS USING THE
CORRECT SCREWDRIVER.
• RETAIN THE SCREWS FOR RE-ASSEMBLY.
• IF YOU ARE BUILDING THE APPLIANCE
AS A BAY WINDOW. REMOVE BOTH THE
BLANKING PLATE AND THE SIDE TRIM.
REPLACE JUST THE BLANKING PLATE USING
THE ORIGINAL SCREWS INTO THE ORIGINAL
MOUNTING HO LES. X6
• IF THE APPLIANCE IS BEING CONFIGURED
AS A LEFT HAND, RIGHT HAND OR FRONT
GLASS ONLY. REMOVE THE SIDE TRIM FROM
THE BLANKING PLATE AND REPLACE THE
SCREWS LEAVING THE BLANKING PLATE ON
THE CHOSEN SIDE.
BLANKING
PLATE ONLY
SIDE TRIM
ONLY
HOW TO INSTALL YOUR
APPLIANCE
8
. CONFIGURING YOUR WINDOW
SIDE
TRIM
BLANKING
PLATE