Paul Agnew Ilektro 1250L, User Instructions And Installation, Page: 14 / 40

14
CLEANING THE OUTLETS
• ENSURE THE APPLIANCE IS
SWITCHED
OFF AT THE ISOLATION SWITCH
• CLEAN THE AIR OUTLET GRILLES
REGULARLY WITH A SOFT CLOTH OR THE
NOZZLE OF A VACUUM CLEANER
• DUST BUILD-UP CAN INHIBIT EFFICIENT
PERFORMANCE OF THE FAN AND LEAD TO
THE SAFETY CUT-OUT OPERATING.
• KEEP THE AREA AROUND THE APPLIANCE
CLEAN AND FREE OF FLUFF, DUST OR PET
HAIR.
• IN PARTICULAR, BUILD-UP OF DUST ETC.
CAN OCCUR AROUND THE HEATER VENT
AREA. TAKE PARTICULAR CARE TO KEEP
THIS AREA FREE FROM SUCH PARTICLES
ON A REGULAR BASIS TO PREVENT BUILD-
UP.
BATTERY REPLACEMENT
WHEN THE REMOTE BATTERIES IS LOW IT
MUST BE CHANGED IMMEDIATELY. INSTALL
CORRECT REPLACEMENTS AND DISPOSE OF
THE OLD BATTERIES CAREFULLY.
HOW TO USE YOUR APPLIANCE
5
. MAINTENANCE AND CARE
BATTERY REPLACEMENT
REMOTE CONTROL
BATTERY INFORMATION - SEE FIG. 35
1.
SLIDE OPEN THE BATTERY COVER ON
THE BACK OF THE REMOTE CONTROL
2.
INSTALL AAA BATTERIES INTO THE
REMOTE CONTROL
3.
REPLACE THE BATTERY COVER
Fig.35
DISCARD LEAKY BATTERIES
DISPOSE OF BATTERIES IN THE
PROPER MANNER ACCORDING TO
LOCAL REGULATIONS.
ANY BATTERY MAY LEAK ELECTROLYTE IF
MIXED WITH A DIFFERENT BATTERY TYPE,
IF INSERTED INCORRECTLY, IF ALL
THE BATTERIES ARE NOT REPLACED AT
THE SAME TIME, IF DISPOSED OF IN A FIRE,
OR IF AN ATTEMPT IS MADE TO
CHARGE A BATTERY NOT INTENDED
TO BE RECHARGED.