9
- Remove Knock Out Cup By loosening
the Knock Out Knob while holding the
head of the bolt with the speed driver
provided with the machine.
- All of the parts that were removed from
the machine can now be washed and
sanitized thoroughly. The machine itself
should be cleaned and sanitized by hand.
This Machine Should Not be Hosed
Down or Pressure Washed For
Cleaning!
Knock Out
Cup
Knock Out
Knob
Speed
Driver
*To Re-Assemble the Machine reverse the above procedure. Hopper bolts
should only be hand tightened with the Speed Driver provided.
*The Knock Out Cup Should be installed on the Machine after all other
parts are in place. The Mold Plate should be all the way out toward the
front of the machine and the Knock Out Arm should be in the down
position for the cup to align with the mold plate properly. Be sure that the
Spacer Plate’s O-Rings are facing up to come in contact with the bottom
of the Hopper.
Installing Patty Paper on Interleaver:
Place a stack of Paper no thicker than one
inch under the Pressure Foot. Slide hole
in the stack of paper over center pin on
interleaver. This can be accomplished
without stopping the machine.
*Placing more than one inch of paper
on pin may cause improper paper
feeding.
Pressure Foot
Center Pin
Patty-O-Matic Inc. offers the highest quality of
patty paper, machine lubricant, and machine
grease. Please contact the factory for
information on these products.
Toll Free 877-938-5244
