manualshive.com logo in svg

Patton SN4112S, Manual, Page: 4 / 4

Share
Download
Patton SN4112S Manual Download Page 4

4

4. Now, connect the analogue devices to the activated ports on the Patton ATA (FXS*).

 

5. Then connect the Patton ATA to your network using the respective connection cable.

 

6. Now as a last step, connect the mains unit / power supply to the Patton ATA.

 

*) FXS (Foreign Exchange Station) is an interface used to connect analogue devices (also referred to
as “POTS”:Plain Old Telephone Service).

It can take a few minutes until the Patton ATA is ready for use, given that the
configuration must be downloaded first. This can take up to 15 minutes.

Summary of Contents for SN4112S

Page 1: ... up to 24 analogue devices Patton SN 4332 up to 32 analogue devices Patton SN 4412 up to 12 analogue devices Patton SN 4416 up to 16 analogue devices Patton SN 4424 up to 24 analogue devices Patton SN 4432 up to 32 analogue devices The following connection cables are available for Patton models Patton SN 41xx models are connected with a standard patch cable RJ45 Patton SN 44xx models require a sep...

Page 2: ...s and modern fax devices are capable of various settings for specific transmission standards that might disturb the adapter Trying to send a fax the device will give an error message which varies depending on the device model and producer Note that a fax number dialed needs an prefix number e g 9 for UK Furthermore deactivate the following settings Deactivate V 34 Set the maximum bit rate to 9600 ...

Page 3: ...on 2 After adding the device the port 0 is automaticly generated If you want to add more ports then add the desired number of ports under ELEMENTS Devices Add new device Patton Port There please select the MAC address for the Patton ATA under Base station Under Port please select the port you wish to activate 3 After adding the device and activating the port please add a new phone extension for th...

Page 4: ... cable 6 Now as a last step connect the mains unit power supply to the Patton ATA FXS Foreign Exchange Station is an interface used to connect analogue devices also referred to as POTS Plain Old Telephone Service It can take a few minutes until the Patton ATA is ready for use given that the configuration must be downloaded first This can take up to 15 minutes ...

Reviews:

No comments