3
Initial operation of Patton devices:
1. When ordering Patton devices from NFON, the device is automatically added to the NFON
telephone system.Therefore, please first check whether or not the MAC address already exists on
your NFON administration portal (
If not, please add a new device (Add new device > Patton).
2. After adding the device, the port 0 is automaticly generated. If you want to add more ports then
add the desired number of ports under “ELEMENTS / Devices” (Add new device > Patton > Port).
There, please select the MAC address for the Patton ATA under “Base station”. Under “Port”, please
select the port you wish to activate.
3. After adding the device and activating the port, please add a new phone extension for the Patton
ATA under “Targets / Add new target/ phone extension”. There, please select the MAC a
port number for the Patton ATA under “Phone Device”.