Patton SN4112S Manual Download Page 1

1

Leaflet Multiport Patton ATA (SmartNode (SN) 41xx(s), 43xx und 44xx)

A. General information

The Patton Multiport-ATA (Analogue Telephone Adapter) connects analogue devices to IP-based data
networks. It is excellently suited for integrating analogue fax machines (T.38). Of course it can also
be used to integrate analogue telephones or door openers, which then establish a connection to the
NFON telephone system.

The Patton ATA converts voice traffic into data packets for transmission via your IP network. Thanks
to the international standards for voice- and data networks, the Patton ATA ensures reliable
operation.

The following Patton models are available:

» Patton SN 4112s (up to 2 analogue devices)
» Patton SN 4114 (up to 4 analogue devices)
» Patton SN 4118 (up to 8 analogue devices)
» Patton SN 4316* (up to 16 analogue devices)
» Patton SN 4324* (up to 24 analogue devices)
» Patton SN 4332* (up to 32 analogue devices)
» Patton SN 4412* (up to 12 analogue devices)
» Patton SN 4416* (up to 16 analogue devices)
» Patton SN 4424* (up to 24 analogue devices)
» Patton SN 4432* (up to 32 analogue devices)

The following connection cables are available for Patton models:

Patton SN 41xx models are connected with a standard patch cable (RJ45)
Patton SN 44xx models require a separate connection cable

You can choose between 2 “general” cable types with the following cable heads for the 12, 16 and 24
port Patton:

Patton connection cable 50 PIN TELCO on 50 PIN TELCO
Patton connection cable 50 PIN TELCO on open end

You can choose between 2 different cable types with the following cable heads for the 12 and 16
port Patton:

Patton connection cable 50 PIN TELCO on RJ45
Patton connection cable 50 PIN TELCO on RJ11

You can choose between 2 different cable types with the following cable heads for the 24 port
Patton:

Patton connection cable 50 PIN TELCO on RJ45
Patton connection cable 50 PIN TELCO on RJ11

Summary of Contents for SN4112S

Page 1: ... up to 24 analogue devices Patton SN 4332 up to 32 analogue devices Patton SN 4412 up to 12 analogue devices Patton SN 4416 up to 16 analogue devices Patton SN 4424 up to 24 analogue devices Patton SN 4432 up to 32 analogue devices The following connection cables are available for Patton models Patton SN 41xx models are connected with a standard patch cable RJ45 Patton SN 44xx models require a sep...

Page 2: ...s and modern fax devices are capable of various settings for specific transmission standards that might disturb the adapter Trying to send a fax the device will give an error message which varies depending on the device model and producer Note that a fax number dialed needs an prefix number e g 9 for UK Furthermore deactivate the following settings Deactivate V 34 Set the maximum bit rate to 9600 ...

Page 3: ...on 2 After adding the device the port 0 is automaticly generated If you want to add more ports then add the desired number of ports under ELEMENTS Devices Add new device Patton Port There please select the MAC address for the Patton ATA under Base station Under Port please select the port you wish to activate 3 After adding the device and activating the port please add a new phone extension for th...

Page 4: ... cable 6 Now as a last step connect the mains unit power supply to the Patton ATA FXS Foreign Exchange Station is an interface used to connect analogue devices also referred to as POTS Plain Old Telephone Service It can take a few minutes until the Patton ATA is ready for use given that the configuration must be downloaded first This can take up to 15 minutes ...

Reviews: