Introduction
53
SmartNode 5481 & 5491 User Manual
F
• Reset Button Functions
Introduction
The
Reset
) is used to do the following:
•
Reboot the SmartNode device (see section
“Resetting the SmartNode device when it is operating and the
•
Erase the
startup-config
settings, which is followed by a SmartNode device reboot as indicated by the slow
blinking of all LEDs (see section
“Resetting the SmartNode device when it is operating and the Power LED
•
Factory reset, which is followed by a device reboot as indicated by the fast blinking of all LEDs (see section
“Resetting the SmartNode device when it is operating and the Power LED is lit”
Figure 16. SN5481 and SN5491
Reset
buttons
SN5491
SN5481