background image

2

SmartNode 5400 Series Quick Start Guide

• Do not open the device when the power cord is connected. For sys-

tems without a power switch and without an external power 
adapter, line voltages are present within the device when the power 
cord is connected.

• For devices with an external power adapter, the power adapter shall 

be a listed 

Limited Power Source

 The mains outlet that is utilized to 

power the device shall be within 10 feet (3 meters) of the device, 
shall be easily accessible, and protected by a circuit breaker in compli-
ance with local regulatory requirements.

• For AC powered devices, ensure that the power cable used meets all 

applicable standards for the country in which it is to be installed.

• For AC powered devices which have 3 conductor power plugs (L1, L2 

& GND or Hot, Neutral & Safety/Protective Ground), the wall outlet 
(or socket) must have an earth ground.

• For DC powered devices, ensure that the interconnecting cables are 

rated for proper voltage, current, anticipated temperature, flammabil-
ity, and mechanical serviceability.

• WAN, LAN & PSTN ports (connections) may have hazardous voltages 

present regardless of whether the device is powered ON or OFF.  
PSTN relates to interfaces such as telephone lines, FXS, FXO, DSL, 
xDSL, T1, E1, ISDN, Voice, etc. These are known as “hazardous net-
work voltages” and to avoid electric shock use caution when working 
near these ports.  When disconnecting cables for these ports, detach 
the far end connection first.

Do not work on the device or connect or disconnect cables during periods 
of lightning activity. 

This device contains no user serviceable parts.  This device can only be 
repaired by qualified service personnel.

This device is NOT intended nor approved for connection to the PSTN. It 
is intended only for connection to customer premise equipment.

In accordance with the requirements of council directive 2002/96/EC on Waste of 
Electrical and Electronic Equipment (WEEE), ensure that at end-of-life you separate 
this product from other waste and scrap and deliver to the WEEE collection system in 
your country for recycling.

WARNING

WARNING

WARNING

Summary of Contents for SmartNode 5400 Series









Reviews: