SmartNode 4670 Ports and LEDs
20
SmartNode 4660 & 4670 User Manual
1 • General information
SmartNode 4670 front panel
The LED definitions are listed in
table 5
.
12V DC, 1.0A
The SmartNode has a 12V DC 1A power input (see
figure 2
).
Reset
The reset button (see
figure 2
) has three functions:
•
Restart the unit with the current startup configuration—Press (for less than 1
second) and release the
Reset
button to restart the unit with the current star-
tup configuration.
•
Restart the unit with factory default configuration—Press the
Reset
button
for 5 seconds until the
Power
LED starts blinking to restart the unit with fac-
tory default configuration.
•
Restart the unit in bootloader mode (to be used only by trained SmartNode
4660 technicians)—Starting with the unit powered off, press and hold the
Reset
button as you apply power to the unit. Release the
Reset
button when
the
Power
LED starts blinking so the unit will enter bootloader mode.
Table 7. SmartNode 4670 LED definitions
LED
Description
Power
When lit, indicates power is applied and the unit is in normal operation. Off indi-
cates no power applied. Flashes once per second during boot (startup).
Table 6. SN4670 rear panel ports (Continued)
Port
Description
