Compliance
40
SmartNode 4660 & 4670 User Manual
A • Compliance information
Compliance
EMC Compliance
•
FCC Part 15, Class B
•
EN55022, Class B
•
EN55024
Low Voltage Directive (Safety) Compliance
•
UL60950-1/CSA C22.2 No. 60950-1
•
IEC/EN60950-1 2nd Edition
•
AS/NZS60950-1
Radio and TV Interference
The SmartNode router generates and uses radio frequency energy, and if not installed and used properly-that
is, in strict accordance with the manufacturer’s instructions-may cause interference to radio and television
reception. The SmartNode router have been tested and found to comply with the limits for a Class B comput-
ing device in accordance with specifications in Subpart B of Part 15 of FCC rules, which are designed to pro-
vide reasonable protection from such interference in a commercial installation. However, there is no guarantee
that interference will not occur in a particular installation. If the SmartNode router does cause interference to
radio or television reception, which can be determined by disconnecting the unit, the user is encouraged to try
to correct the interference by one or more of the following measures: moving the computing equipment away
from the receiver, re-orienting the receiving antenna and/or plugging the receiving equipment into a different
AC outlet (such that the computing equipment and receiver are on different branches).
CE Declaration of Conformity
Patton Electronics, Inc declares that this device is in compliance with the essential requirements and other rel-
evant provisions of Directive 1999/5/EC. The Declaration of Conformity may be obtained from Patton Elec-
tronics, Inc at
www.patton.com/certifications
.
The safety advice in the documentation accompanying this device shall be obeyed. The conformity to the
above directive is indicated by CE mark on the device.
Authorized European Representative
D R M Green
European Compliance Services Limited.
Avalon House, Marcham Road
Abingdon,
Oxon OX14 1UD, UK
