SmartNode 4300 Series detailed description
18
SmartNode 4300 Series User Manual
1
• General Information
SmartNode 4300 Series rear panels
The SmartNode 4300 rear panel ports are shown in figure 3 and described in Table 3 on page 18.
Model SN4332
43xx/JS/UI
100-240V
(50-60 Hz)
1 AMP
UN
IT
EQ
UI
PP
ED
W
ITH
D
UA
L S
UP
PL
IE
S
DI
SC
ON
NE
CT
B
OT
H
SU
PP
LIE
S
BE
FO
RE
S
ER
VIC
IN
G
ET
H
0/
0
Co
ns
ole
Te
lco
P
ort
s
50
Re
se
t
43xx/JS/48
Ethernet port
Console port
Telco ports
36-72V
1.6 AMP
100-240V
(50-60 Hz)
1 AMP
Telco Ports
100-240V
(50-60 Hz)
1 AMP
Console
Reset
Console
Reset
ETH 0/0
ETH 0/0
Telco Ports
Console
Reset
Console
Reset
ETH 0/0
ETH 0/0
Figure 3. SmartNode 4300 rear panels
Table 3. Port descriptions
Port
Description
ETH 0/0
(WAN Ethernet 0/0 port)
10/100Base-Tx full-/half-duplex, RJ-45, auto detection and auto-
MDI-X connects the unit to an Ethernet WAN device (for example, a
cable modem, DSL modem, or fiber modem).
Console
(RS-232 control port)
Used for service and maintenance, the Console port, an RS-232 RJ-
45 connector with EIA-561 pinout, connects the router to a serial ter-
minal such as a PC or ASCII terminal (also called a dumb terminal).
Asynchronous default data rate 9600 bps, hardware DSR and DTR
signals for external modems are wired directly together internally
FXS Ports
(4300/JS models)
For connection of up to 32 analog FXS devices (selectable for 12,
16, 24, or 32). Either a 50-pin or 64-pin RJ21X connector that con-
nects the router to an analog terminal (a telephone, for example)
FXO port. EuroPOTS support (ETSI EG201 188).
FXO Ports
(4300/JO models)
For connection of up to 32 analog FXO devices (selectable for 12,
16, 24, or 32). FXO RJ-11(6 position, 4 wire) connectors that connect
the product with an analog line (FXS port). EuroPOTS support
(ETSI EG201 188).
