Configure the IP address
20
3088/I Getting Started Guide
2 • Initial configuration
Figure 5. Connecting the RocketLink-G to the local IP network (Model 3088/I shown)
Log onto the web management interface
You will now access the web management graphical user interface (GUI) to configure the RocketLink-G using
a standard web browser (such as Netscape Browser, Mozilla Firefox, or Internet Explorer).
1.
At your PC, open a web browser and enter the IP address you assigned to the RocketLink-G’s Ethernet
LAN port in step 2 of section
on page 19. (In this example, 10.10.4.10.)
(see
Figure 6. RocketLink-G web management home page
2.
Log in to the web management home page using the username
superuser
and the password
superuser.
Connect the G.SHDSL port
3.
Obtain single-twisted-pair cable with an RJ-11 plug connector at each end.
4.
Plug one end of the cable into the (yellow) RJ-11 socket (labelled
Line)
on the RocketLink-G NTU.
(See
5.
Plug the other end of the cable into the RJ-11 wall socket that provides your G.SHDSL service.
6.
Go to
G.SHDSL > Configuration
to configure the DSL port parameters.
MDI-X
Line
Ethernet
Power
Console
Connect to Ethernet port
Ethernet port
PC
MDI-X switch
