Status LEDs
50
SmartNode 4520 & 4110 Series User Manual
5 • LEDs status and monitoring
Table 9. SmartNode LED Indications
LED
Description
Note
If an error occurs, all LEDs will flash once per second.
Power
When lit, indicates power is applied. Off indicates no power applied.
Run
When lit, indicates normal operation. Flashes once per second during boot (startup).
VoIP Link
When lit, indicates the gateway is registered on a gatekeeper, media gateway con-
troller, associated to a remote unit, or has an active VoIP connection. Off indicates the
unit is not configured or registered and has no active VoIP connection. Flashing green
indicates that the unit is attempting or has failed to associate/register
FXS
(each port)
Off indicates on-hook condition. Solid green when off-hook. Flashes to follow ring
cadence.
FXO
(each port)
Off indicates on-hook condition. Solid green when off-hook. Flashes to follow ring
cadence.
Ethernet
(each port) •
Link
: Lit when Ethernet link is up.
•
100M
: On when 100-Mbps Ethernet is selected.
•
Activity
: Flashes when data is received or transmitted from the unit to the LAN.
Summary of Contents for SMARTNODE 4110 Series
Page 47: ...47 Chapter 5 LEDs status and monitoring Chapter contents Status LEDs 48...
Page 73: ...73 Appendix E SmartNode 4110 Series factory configuration Chapter contents Introduction 74...
Page 75: ...75 Appendix F SmartNode 4520 Series factory configuration Chapter contents Introduction 76...
Page 77: ...77 Appendix G Installation checklist Chapter contents Introduction 78...
