Preparing the RAS for configuration
31
Model 2960/2996 RAS Getting Started Guide
3 • Configuring the RAS for operation
– 8 bits
– No Parity
– 1 Stop bit
– No flow control
3.
Set up HyperTerminal™ as follows:
– Open a HyperTerminal session.
– Enter a name for this connection.
– Click on the
Connect using:
pop-up menu and choose the
Direct to Com
X
option (where
X
is the number
of the COM port onto which you connected the cable in step 1) (see
figure 13
).
Figure 13. Hyperterminal properties
– Configure the COM port settings as shown in
figure 14
.
