background image

3.3.2  Model 1001RCM13445 & 1001RCM134TB Strap Settings

Figure 8 shows the strap location for the Model 1001RCM134XX

(M/34) rear card.  This strap determines whether Signal Ground and 
Frame Ground will be connected.  

The table below provides an overview of interface strap functions

for the rear interface cards.  Following the table overview are detailed
descriptions of each strap’s function.

DTE Shield (M/34 Pin A) & FRGND (JB3)

In the connected position, this strap links M/34 pin A & frame

ground.  In the open position, pin A is disconnected from frame
ground.

 JB3

Position 1&2  =  DTE Shield (Pin A) and FRGND Connected
Position 2&3  =  DTE Shield (Pin A) and FRGND Not Connected

The table below provides an overview of interface strap functions

for the rear interface cards.  Following the table overview are detailed
descriptions of each strap’s function.

DTE Shield (DB-25 Pin 1) & FRGND (JB3)

In the connected position, this strap links DB-25 pin 1 & frame

ground.  In the open position, pin 1 is disconnected from frame ground.

JB3

Position 1&2  =  DTE Shield (Pin 1) and FRGND Connected
Position 2&3  =  DTE Shield (Pin 1) and FRGND Not Connected

SGND & FRGND (JB4)

In the connected position, this strap links DB-25 pin 7 (Signal

Ground) and frame ground through a 100 ohm resistor. In the open
position, pin 7 is connected directly to frame ground. 

JB4

Position 1&2  =  SGND (Pin 7) and FRGND Connected through

a 100 ohm resistor

Position 2&3  =  SGND (Pin 7) and FRGND Directly Connected

15

1 2 3

1 2 3

JB3

JB4

Figure  8. 1001RCM134XX strap locations

INTERFACE CARD STRAP SUMMARY TABLE #2

Strap

Function

Position 1&2 Position 2&3

JB3 DTE Shield (Pin A) & FRGND Connected       

Open*

JB4

FRGND & SGND (Pin B)

Connected

Open*

* Indicates default setting

16

INTERFACE CARD STRAP SUMMARY TABLE #1

Strap

Function

Position 1&2 Position 2&3

JB3

DTE Shield (Pin1) & FRGND

Connected       

Open*

JB4

FRGND & SGND

Connected

Open*

* Indicates default setting

Summary of Contents for NetLink 1095RC






















Reviews: