3060/X21
109001UA
P
ATTON
E
LECTRONICS
C
O
.
I
NSTALLATION
A
ND
O
PERATIONS
M
ANUAL
i
PROPRIETARY NOTICE
The information contained herein is proprietary and confidential to Patton
Electronics Co. Any reproduction or redistribution of this
publication, in whole or in part, is expressly prohibited unless written authorization is given by Patton
Electronics Co.
WARRANTY NOTICE
WARRANTIES: Patton
Electronics Co. (hereafter referred to as Patton) warrants that its equipment is free from any defects in
materials and workmanship. The warranty period shall be two years from the date of shipment of equipment. Patton’s sole obligation
under its warranty is limited to the repair or replacement of the defective equipment, provided it is returned to Patton, transportation
prepaid, within a reasonable period. This warranty will not extend to equipment subjected to accident, misuse, alterations or repair not
made by Patton or authorized by Patton in writing.
PUBLICATION NOTICE
This manual has been compiled and checked for accuracy. The information in this manual does not constitute a warranty of perfor-
mance. Patton reserves the right to revise this publication and make changes from time to time in the content thereof. Patton assumes
no liability for losses incurred as a result of out-of-date or incorrect information contained in this manual.
EMISSIONS REQUIREMENTS
FCC Class A
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC
rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
CANADIAN EMISSIONS
This digital apparatus does not exceed the Class A limits for noise emissions from a digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
Le present appareil numerique n’emet pas de bruits redioelectriques depassant les limites applicables aux appareils numeriques de la
Class A prescites dans le Reglement sur le brouillage redioelectrique edicte par le ministere des Communications du Canada.
RADIO AND TV INTERFERENCE
The Patton MSDs generate and use radio frequency energy, and if not installed and used properly—that is, in strict accordance with
the manufacturer’s instructions—may cause interference to radio and television reception. The Patton MSDs have been tested and
found to comply with the limits for Class A computing devices in accordance with the specifications in Subpart J of Part 15 of FCC
rules, which are designed to provide reasonable protection from such interference in a commercial installation. However, there is no
guarantee that interference will not occur in a particular installation. If the Patton MSDs do cause interference to radio or television
reception, which can be determined by disconnecting the cables, the user is encouraged to try to correct the interference by one or
more of the following measures: moving the computing equipment away from the receiver, re-orienting the receiving antenna, and/or
plugging the receiving equipment into a different AC outlet (such that the computing equipment and receiver are on different
branches).
SERVICE
All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a
Return Materials Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics
Technical Services at:
tel: (301) 975-1007;
email: [email protected];
or, www: http://www.patton.com.
NOTE: Packages received without an RMA number will not be accepted.
Patton Electronics’ technical staff is also available to answer any questions that might arise concerning the installation or u se of your
Patton MSDs. Technical Service hours: 8AM to 5PM EST, Monday through Friday.
