1
2
1.0 WARRANTY INFORMATION
Patton Electronics warrants all Model 2086 Series components to
be free from defects, and will—at our option—repair or replace the
product should it fail within one year from the first date of shipment.
This warranty is limited to defects in workmanship or materials,
and does not cover customer damage, abuse or unauthorized modifi-
cation. If this product fails or does not perform as warranted, your sole
recourse shall be repair or replacement as described above. Under no
condition shall Patton Electronics be liable for any damages incurred
by the use of this product. These damages include, but are not limited
to, the following: lost profits, lost savings and incidental or consequen-
tial damages arising from the use of or inability to use this product.
Patton Electronics specifically disclaims all other warranties,
expressed or implied, and the installation or use of this product shall be
deemed an acceptance of these terms by the user.
1.1 RADIO AND TV INTERFERENCE
The Model 2086 Series generates and uses radio frequency ener-
gy, and if not installed and used properly—that is, in strict accordance
with the manufacturer's instructions—may cause interference to radio
and television reception. The Model 2086 Series has been tested and
found to comply with the limits for a Class A computing device in accor-
dance with the specifications in Subpart J of Part 15 of FCC rules,
which are designed to provide reasonable protection from such interfer-
ence in a commercial installation. However, there is no guarantee that
interference will not occur in a particular installation. If the Model 2086
Series does cause interference to radio or television reception, which
can be determined by disconnecting the RS-232 interface, the user is
encouraged to try to correct the interference by one or more of the fol-
lowing measures: moving the computing equipment away from the
receiver, re-orienting the receiving antenna and/or plugging the receiv-
ing equipment into a different AC outlet (such that the computing
equipment and receiver are on different branches).
1.2 CE NOTICE
The CE symbol on your Patton Electronics equipment indicates
that it is in compliance with the Electromagnetic Compatibility (EMC)
directive and the Low Voltage Directive (LVD) of the Union European
(EU). A Certificate of Compliance is available by contacting Technical
Support.
1.3 SERVICE
All warranty and nonwarranty repairs must be returned freight pre-
paid and insured to Patton Electronics. All returns must have a Return
Materials Authorization number on the outside of the shipping contain-
er. This number may be obtained from Patton Electronics Technical
Services at:
Tel:
(301) 975-1007
Email: [email protected]
www: http://www.patton.com
Patton Electronics' technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Patton Model 2086 Series. Technical Service hours: 8AM to 5PM
EST, Monday through Friday.
NOTE:
Packages received without an RMA number will not be
accepted.
