147001UA
ii
Copyright© 2000 Patton Electronics Co., All Rights Reserved
PROPRIETARY NOTICE
The information contained herein is proprietary and confidential to Patton
Electronics Co. Any
reproduction or redistribution of this publication, in whole or in part, is expressly prohibited unless written
authorization is given by Patton
Electronics Co.
WARRANTY NOTICE
WARRANTIES: Patton
Electronics Co. (hereafter referred to as Patton) warrants that its equipment is
free from any defects in materials and workmanship. The warranty period shall be two years from the
date of shipment of equipment. Patton’s sole obligation under its warranty is limited to the repair or
replacement of the defective equipment, provided it is returned to Patton, transportation prepaid, within
a reasonable period. This warranty will not extend to equipment subjected to accident, misuse,
alterations or repair not made by Patton or authorized by Patton in writing.
PUBLICATION NOTICE
This manual has been compiled and checked for accuracy. The information in this manual does not
constitute a warranty of performance. Patton reserves the right to revise this publication and make
changes from time to time in the content thereof. Patton assumes no liability for losses incurred as a
result of out-of-date or incorrect information contained in this manual.
RADIO AND TV INTERFERENCE
The Patton MSDs generate and use radio frequency energy, and if not installed and used properly—that
is, in strict accordance with the manufacturer’s instructions—may cause interference to radio and
television reception. The Patton MSDs have been tested and found to comply with the limits for Class A
computing devices in accordance with the specifications in Subpart J of Part 15 of FCC rules, which are
designed to provide reasonable protection from such interference in a commercial installation.
However, there is no guarantee that interference will not occur in a particular installation. If the Patton
MSDs do cause interference to radio or television reception, which can be determined by disconnecting
the cables, the user is encouraged to try to correct the interference by one or more of the following
measures: moving the computing equipment away from the receiver, re-orienting the receiving antenna,
and/or plugging the receiving equipment into a different AC outlet (such that the computing equipment
and receiver are on different branches).
CE NOTICE
The CE symbol on your Patton Electronics equipment indicates that it is in compliance with the
electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European
Union (EU). A Certificate of Compliance is available by contacting Technical Support.
SERVICE
All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electron-
ics. All returns must have a Return Materials Authorization number on the outside of the shipping
container. This number may be obtained from Patton Electronics Technical Support at:
tel: (301) 975-1007;
email: [email protected];
or, www: http://www.patton.com.
NOTE: Packages received without an RMA number will not be accepted.
Patton Electronics’ technical staff is also available to answer any questions that might arise concerning
the installation or use of your Patton MSDs. Technical Support hours: 8AM to 5PM EST, Monday
through Friday.
