GB
- 280 -
CAREFUL HANDLING AND USE OF CORDLESS EQUIPMENT
•
Ensure that the equipment is switched off before you insert
the battery.
Inserting a battery into an electric tool that is swit-
ched on can cause accidents.
•
Only charge the batteries in chargers that are recommen-
ded by the manufacturer.
A charger that is designed for a cer-
tain type of batteries may pose a fire risk if it is used with other
types of batteries.
•
Use only the correct batteries in the electric tools
. The use of
other batteries may result in injuries and a fire risk.
•
Keep unused batteries away from paper clips, coins, keys,
nails, screws and other metallic objects that could cause a
short circuit between the contacts.
A short circuit between the
battery contacts may cause burns or a fire.
•
In case of incorrect use, fluid may escape from the battery.
Avoid contact with it. If you touch it by mistake, rinse the af-
fected area with water. If you get the fluid in your eyes, also
seek medical advice.
Leaking battery fluid can cause skin irrita-
tion or burns.
Additional safety instructions
We pay a great deal of attention to the design of every battery pack
to ensure that we supply you with batteries which feature maximum
power density, durability and safety. The battery cells have a wide
range of safety devices. Each individual cell is initially formatted and
its electrical characteristic curves are recorded. These data are then
used exclusively to be able to assemble the best possible battery
packs.
Despite all the safety precautions, caution must always
be exercised when handling batteries. The following points
must be obeyed at all times to ensure safe use.
Safe use can only be guaranteed if undamaged cells are used.
Incorrect handling can cause cell damage.
Anl_PE_ARM_36_Li_SPK7.indb 280
Anl_PE_ARM_36_Li_SPK7.indb 280
07.12.15 13:37
07.12.15 13:37
