GB
- 223 -
5. Do not use the supplied battery charger to charge other cordless
tools.
6. In heavy use the battery pack will become warm. Allow the battery
pack to cool to room temperature before commencing with the
charging.
7.
Do not over-charge batteries.
Do not exceed the maximum
charging times. These charging times only apply to discharged
batteries. Frequent insertion of a charged or partly charged batte-
ry pack will result in over-charging and cell damage. Do not leave
batteries in the charger for days on end.
8.
Never use or charge batteries if you suspect that the last
time they were charged was more than 12 months previous-
ly.
There is a high probability that the battery pack has already
su
ff
ered dangerous damage (exhaustive discharge).
9. Charging batteries at a temperature below 10°C will cause chemi-
cal damage to the cell and may cause a
fi
re.
10. Do not use batteries which have heated during the charging pro-
cess, as the battery cells may have su
ff
ered dangerous damage.
11. Do not use batteries which have su
ff
ered curvature or deformation
during the charging process or which show other non-typical sym-
ptoms (gassing, hissing, cracking,…)
12. Never fully discharge the battery pack (recommended depth of di-
scharge max. 80%) A complete discharge of the battery pack will
lead to premature ageing of the battery cells.
13. Never charge the batteries unsupervised.
Protection from environmental in
fl
uences
1. Wear suitable work clothes. Wear safety goggles.
2.
Protect your cordless tool and the battery charger from
moisture and rain.
Moisture and rain can cause dangerous cell
damage.
3. Do not use the cordless tool or the battery charger near vapors
and in
fl
ammable liquids.
4. Use the battery charger and cordless tools only in dry conditions
Anl_PE_AFR_18_Li_SPK7.indb 223
Anl_PE_AFR_18_Li_SPK7.indb 223
13.10.2016 15:23:55
13.10.2016 15:23:55
