Pattfield Ergo Tools PE-AA 20 Li, Original Instructions Manual, Page: 70 / 73

EN 138 EN 139
INSERTING (REPLACING) SAW
BLADE
Rotate the blade clamp 8 counter
clockwise.
Caution! Make sure the battery is
removed from the tool.
1 Insert the saw blade through the open-
ing and release the blade clamp 8 .
Caution! The saw blade is sharp.
Wear protective gloves.
2
ATTACH BATTERY
Slide the battery 6 onto the tool until it
clicks into place.
Caution! Only use the batteries
specified in technical data.
1 To release the battery, press the bat-
tery release switch 5 and slide off the
battery 6 .
2
BRANCH CUTTING
The saw blade must always exceed the
workpiece.
Place the branch jaw clamp of the saw
on the branch you want to cut. Turn on
the tool and push the saw blade 1 gen-
tly against the branch.
1
GENERAL CUTTING
Place soleplate 3 on the workpiece.
Turn on the tool and push the saw blade
slowly through the workpiece.
2
Make sure the pins of the branch jaw
clamp 2 fit into the related recesses of
the soleplate 3 and the lock release 9
snaps into place.
2
MOUNTING BRANCH JAW CLAMP
Place the branch jaw clamp 2 on the
soleplate 3 from above while pressing
the lock release 9 against the back
pressure lever 10 .
1
2 1
1 2
1 2
1.
2.
1 2
1.
2.