EN
136
EN
137
Product overview
1
Saw blade
2
Branch jaw clamp
3
Soleplate
4
On/Off switch
5
Battery release switch
6
Battery (not included)
7
Release button
8
Blade holder
9
Locking device branch jaw clamp
10
Back pressure lever
Using the tool
1. With branch jaw clamp
Place the
branch jaw clamp of the tree pruning saw
on the branch you want to cut. The clamp
will help you to guide the equipment in a
straight line.
Without branch jaw clamp
:
Place the
Soleplate against the workpiece. Make
sure the workpiece can´t slip.
2.
To switch on the tool press the release
button
, then press and hold the On/Off
switch
3.
Only then proceed with the sawing.
4.
To switch off the tool release the On/Off
switch
5.
To remove a broken saw blade, proceed as
follows:
•
Remove the battery
from the battery
slot.
•
Point the tool downwards and turn the
blade holder
. Shake the broken saw
blade out of the blade holder.
Caution!
The saw blade turns hot
while in use. Do not touch! Danger of
burning!
Intended use
The tool is intended for wood, plastic and met-
al cutting applications. The tool is not intended
for commercial use.
Any other use or modification to the tool is
considered as improper use and could cause
considerable dangers.
Slide the battery
(not included) onto
the charger and check its LED:
Red:
Charging
Green:
Battery is fully charged
Flashing Red:
Battery is defective
Flashing Green:
Battery is too hot/ cold
2
CHARGE BATTERY
Plug the charger (not included) into a
suitable wall socket.
Caution!
Only use the battery
charger specified in technical data
to charge the battery.
1
2
1
1
8
9
10
7
Lieferumfang
Etendue de livraison
Materiale compreso nella fornitura
Leveringsomvang
Leveransomfång
Rozsah dodávky
Rozsah dodávky
Volumul livrat
Scope of delivery
DE
SV
IT
SK
FR
CZ
NL
RO
GB
1x
2
5
4
1x
1x
6
3