Pattfield Ergo Tools PE-2350WS, Original Instructions Manual

Page: 107 / 110

EN 105
GRINDING
Attach the grinding guard A to the tool
and align it, that the operator is pro-
tected from sparking.
1 Close the guard release lever. If the
grinding guard is not securely held in
place, the preload of the release lever
can be increased by use of the wrench.
2
ROTATE HANDLE
Press the rotate handle button 1 to re-
lease the rear end of the handle.
1 Turn the hanlde 90° to the desired po-
sition, so that the two arrows point at
each other.
2
Caution! Make sure the tool is
switched off and unplugged.
WHEEL THICKNESS: 6 - 8 MM
Install a straight grinding wheel with
the lock nut 5 so that the flange points
towards the machine.
Press and hold the spindle lock but-
ton 3 and tighten the lock nut 5 with
the wrench.
3A
Caution! Make sure the handle is
securly locked in place.
WHEEL THICKNESS: 6 - 8 MM
Install a depressed grinding wheel with
the lock nut 5 so that the flange points
towards the machine.
Press and hold the spindle lock but-
ton 3 and tighten the lock nut 5 with
the wrench.
3B
CUTTING
Attach the cutting guard B to the tool
and align it that the operator is protect-
ed from sparking.
1 Close the guard release lever. If the
cutting guard is not securely held in
place, the preload of the release lever
can be increased by use of the wrench.
2
Caution! Make sure the tool is
switched off and unplugged.
WHEEL THICKNESS: 2 - 4 MM
Install a cutting wheel with the lock
nut 5 so that the flange points away
from the machine.
Press and hold the spindle lock but-
ton 3 and tighten the lock nut 5 with
the wrench.
3A
WHEEL THICKNESS: 2 - 4 MM
Install a depressed cutting wheel with
the lock nut 5 so that the flange points
away from the machine.
Press and hold the spindle lock but-
ton 3 and tighten the lock nut 5 with
the wrench.
3B