EN
108
EN
109
Technical Data
Nominal voltage
230 - 240 V~ 50 Hz
Rated power
800 W
No-load speed (n
0
)
0-3000/min
Impact rate
0-48000/min
Max. drilling capacity
Masonry 13 mm
Metal 13 mm
Wood
30 mm
Chuck size
13 mm
Weight
1.8 kg
Protection Class
/ II
Sound pressure level (L
pA
)
93 dB(A) / Uncertainty K
pA
=3 dB(A)
Sound power level (L
WA
)
104 dB(A) / Uncertainty K
WA
=3 dB(A)
Max. vibration emission
a
h
= 16.3 m/s
2
/ Uncertainty K = 1.5 m/s
2
Noise & Vibration
The declared vibration total value and the
declared noise emission values have been
measured in accordance with a standard test
method (EN 62841-1 & EN 62841-2-1) and
may be used for comparing one tool with an-
other. The declared vibration total value may
also be used in a preliminary assessment of
exposure.
Caution!
The vibration and noise
emission during actual use of the pow-
er tool can differ from the declared total value
depending on the ways in which the tool is
used, in particular, what kind of work piece is
machined.
It is necessary to identify safety measures to
protect the operator that are based on an es-
timation of exposure in the actual conditions
of use (taking account of all parts of the op-
erating cycle such as the times when the tool
is switched off and when it is running idle in
addition to the trigger time).
Try to minimize the impact of vibration and
noise. Exemplary measures to reduce vibra-
tion exposure include wearing gloves while
using the tool, limiting working time, and us-
ing accessories in good condition.
Care & Maintenance
Disposal
The
crossed-out wheeled bin
logo
requires the separate collection of
waste electric and electronic equip-
ment (WEEE). Such equipment may
contain valuable, but dangerous and hazard-
ous substances. You are required by law to
return these products to a designated collec-
tion point for the recycling of WEEE and must
not under any circumstances dispose of them
as unsorted municipal waste. In this way, you
can help to conserve resources and protect
the environment.
In Germany, HORNBACH is obliged:
-
to take back old appliances of the same
type free of charge in HORNBACH stores
when you purchase a new electrical or
electronic appliance.
-
to take back up to 3 WEEE of the same
type (up to max. 25 cm edge length) free of
charge in HORNBACH stores, even if you do
not purchase a new appliance.
-
when delivering a new electrical or elec-
tronic appliance to a private household, to
collect an old appliance of the same type
free of charge or to enable you to return it
in your immediate vicinity.
For further details, please consult www.horn-
bach.com or your local authorities.
Children must not play with plastic bags and
packaging material, due to possible injury or
danger of suffocation. Store such material
safely or dispose of environmentally friendly.
Caution!
Make sure the tool is
switched off and unplugged.
- Always keep the tool clean, dry and free of
oil or grease.
- Wear safety glasses to protect your eyes
whilst cleaning.
- For safe and proper working, always keep
the machine and ventilation slots clean.
- Regularly check to see if any dust or foreign
matter has entered the grills near the mo-
tor and around the on/off switch. Use a soft
brush to remove any accumulated dust.
- If the body of the tool needs cleaning, wipe
it with a soft damp cloth. A mild detergent
can be used but nothing like alcohol, petrol
or other cleaning agent.
- Never use caustic agents to clean plastic
parts.
- Lubricate all moving parts at regular inter-
vals.
- Periodically check all fixings. These could
become loose with time due to vibration.
Caution!
If the supply cord is dam-
aged, it must be replaced by the
manufacturer or its service agent or simi-
larly qualified person in order to avoid haz-
ard.
