EN
105
Product overview
1
On / Off switch
2
Drive wheel
3
Belt release lever
4
Sanding belt
5
Auxiliary handle
6
Belt run adjust knob
7
Power cord
8
Lock on button
9
Dust port
DUST BAG
Connect the dust bag to the dust port
9
.
1
Use the zipper on the dust bag to
empty it.
2
Using the tool
1.
Place the tool on the workpiece so that
the complete sanding belt is in contact.
Make sure your workpiece can not slip.
2.
To switch on the tool, press and hold
the on / off switch
1
. To lock the on / off
switch
1
in position, press the lock on
button
8
while the on / off switch
1
is
pressed. Start working, while holding the
tool firmly with both hands.
3.
Move the tool slowly over the workpiece
in parallel lines and successive passes.
4.
To switch off the tool, press and release
the on / off switch
1
.
Never use the tool without a dust
collection system attached.
Intended use
The tool is intended for dry sanding of wood,
plastic, metal, filler as well as coated surfaces.
The tool is not intended for commercial use.
Any other use or modification to the tool is
considered as improper use and could cause
considerable dangers.
Make sure the dust bag is empty
and not clogged.
Warning!
Only switch the tool on
when the sanding belt is in full con-
tact with the workpiece.
Nominal voltage
230 V / ~50 Hz
Rated power
850 W
No-load belt speed
300 m/min
Belt size
76 x 533 mm
Weight
2.8 kg
Protection class
/ II
Degree of protection
IP 20
Sound pressure level (L
pA
)
87 dB(A) / Uncertainty K = 3 dB(A)
Sound power level (L
wA
)
98 dB(A) / Uncertainty K = 3 dB(A)
Max. vibration emission (a
h
)
2.7 m/s
2
/ Uncertainty K = 1.5 m/s
2
Technical Data
1
1
2
4
2
7
8
6
3
5
9
