![background image](http://html1.mh-extra.com/html/patron/rp-504/rp-504_operators-manual_4003348011.webp)
3. Turn the ignition key to the start position (C).
C
a) When the engine starts, immediately release
the ignition key. The ignition key goes back to
position (B).
b) If the engine does not start in 10 seconds,
release the ignition key and wait 5 seconds
before you try again.
4. Let the engine operate at idle speed for 2–3 minutes.
5. Push the throttle button (D) to full throttle.
D
To stop the product
1. Park the product on level ground.
2. Push the throttle button (A) to idle speed.
A
3. Let the engine operate at idle speed for 2–3 minutes.
4. If the engine has an electrical start, do also these
steps:
a) Turn the ignition key to the stop position (A).
A
b) Remove the ignition key to prevent accidental
start.
Compaction indicator (optional)
A
B
C
D
E
• A: Yellow LED. The degree of compaction is 0–30%.
• B: Yellow LED. The degree of compaction is 30–
60%.
• C: Green LED. The degree of compaction is 60–
90%.
• C and D: Green and red LED. When these
LED indicators flash, the ground surface has the
maximum degree of compaction that is applicable for
the product.
• D: Red LED. The degree of compaction is 90–100%.
CAUTION:
Do not operate the
product when the LED indicator (D) is
on with a constant red light. This causes
wear to the product.
• E: Red or green. Power supply indicator.
When you turn the ignition key, a calibration of the
compaction indicator starts. All LED indicators (A) to
(E) come on. After approximately 4 seconds, the LED
indicator (E) changes from red to green and the LED
indicators (A) to (D) go off. When the LED indicators (A)
to (D) are off and the LED indicator (E) is green, you can
start the product.
To operate the product
Always operate the product with the throttle control set
to full throttle.
1982 - 001 - 26.10.2022
11