![background image](http://html1.mh-extra.com/html/patron/gi-3500p/gi-3500p_user-manual_4016291052.webp)
29
7.4 Filtre à air
1. Retirez les vis (1), puis enlevez le couvercle (2)
.
2. Retirez la vis (3), puis enlevez le couvercle du boîtier du filtre à air (4)
.
3. Retirez la cartouche en mousse (5).
4. Lavez la cartouche en mousse dans du solvant, puis faites-la sécher.
5. Huilez la cartouche en mousse, puis pressez l’excédent d’huile. La
cartouche en mousse doit être humide, mais ne doit pas former de
gouttes.
AVIS
• Pressez la cartouche en mousse, mais ne
l’essorez pas. Cela pourrait la déchirer.
6. Insérez la cartouche en mousse dans le boîtier
du filtre à air.
CONSEIL:
Veillez à ce que la surface de
scellement de la cartouche en mousse se colle bien
contre le filtre à air de sorte qu’il n’y ait aucune
fuite d’air.
MAINTENANCE
Be sure no for
eign material enters the crankcase.
8. Install the oil filler cap.
9. Install the cover and tighten the screws.
- 29 -
6 .4
Air filter
1. Remove the screws
①,
and then remove the cover
②.
2. Remove the screw
③
③
and then remove the air filter case cover
④.
④
3. Remove the foam element
.
4. W
ash the foam element in solvent and dry it.
5. Oil the foam element and squeeze out excess oil.
The foam element should be wet bu
t not dripping.
Do not wring out the foam element when squeezing
it. This could cause it to tear
.
6. Insert the foam element into the air filter case.
TIP:
Be sure the foam element sealing surface matcher
is no air leak.
Foam element
Foam element
the air filter so there
The engine should never run without the foam element; excessive piston
and cylinder wear
may result.
7. Install the air filter case cover in its original position and tighten the screw
.
8. Install the cover and tighten the screws.
②
1
Élément de mousse