![background image](http://html1.mh-extra.com/html/patron/gi-3500p/gi-3500p_user-manual_4016291028.webp)
28
7.2 Carburetor adjustment
The carburetor is a vital part of the engine. Adjusting should be left to our
company authorized dealer with the professional knowledge and
equipment to do so properly.
7.3 Engine oil replacement
WARNING
• Avoid draining the engine oil immediately after stopping the engine.
The oil is hot and should be handled with care to avoid burns.
NOTICE
• Do not tilt the generator when adding engine oil. This could result in
overfilling and damage to the engine.
Recommended engine oil: SAE 10W30
Recommended engine oil grade: API Service SE type or higher
Engine oil quantity: 0.5L
NOTICE
• Be sure no foreign material enters the crankcase.
MAINTENANCE
Avoid draining the engine oil immediately after stopping the engine. The oil
is hot and should be handled with care to avoid burns.
1. Place the generator on a level surface and warm up the engine for
several minutes. Stop the engine by turning the switch to “OFF”.
2. Remove the screws on the cover and then remove the cover.
3. Place an oil pan under the engine.
4. Remove the oil fill cap and the oil drain bolt. Let oil drain completely.
5. Reinstall the oil drain bolt.
6. Add engine oil to the upper level. Reinstall the oil fill cap.
7. Wipe the cover clean, and wipe up any spilled oil.
8. Install the oil filler cap.
9. Install the cover and tighten the screws.