1
2
3
4
Remove the cartridge cap from the
cartridge. Firmly install the dispensing
nozzle.
Assemble your EOS. Assemble
casing, housing disc and threaded
piston.
To dispense the product slowly turn
the piston clockwise. Each notch on
the scale dispenses 0.01 mL. Wait a
few seconds to dispense desired
amount of extract if using thicker
materials.
For storage turn the piston
counter-clockwise. It is important to
back the piston right off the gasket to
remove all pressure from the system.
After that place the nozzle cover on
the nozzle.
Assembly guidelines
Pictures and instructions are applicable to EOS Dispenser 2 mL or 5 mL.
Caution:
Dropping EOS Dispenser may result in nozzle breakage. Store dispenser properly after use.
