EN
9
Safety devices
−
The unloader valve can reduce pressure if it exceeds pre-
set values. The spray gun
features a locking device. When the pawl is activated, the spray gun cannot be
operated.
Thermal sensor:
A thermal sensor protects the motor against overloading. The machine will restart after a
few
minutes when the thermal sensor has cooled.
PRODUCT DESCRIPTION
PURPOSE
The
high pressure cleaner is designed to clean vehicles, machines, buildings, facades, etc. in
the private sector.
AREAS OF APPLICATION
•
Never use the machine in potentially explosive areas under any circumstances!
•
The operating temperature must be between 0 and +40
℃
.
•
The machine consists of an assembly with a pump, which is encased in a shock
absorbing housing. For an optimal working position the machine comes with a lance and
a non-
slip handle grip, whose shape and configuration comply with the applicable
regulations.
•
Do not cover or modify the lance or the spray nozzles in any way.
•
The high pressure cleaner is designed to be used with cold or lukewarm (max. 4
0
℃
);
higher temperatures can damage the pump.
•
Do not use water that is dirty, gritty or contains any chemical products, as these could
impair operation and shorten the life of the machine.
•
Accessories can be used to carry out work with foam cleaners, sand spraying.
ASSEMBLY
Mount loose parts delivered with appliance prior to start-up
1.
Install the handle with two screws
according Fig. 3.
2.
Install the High
-pressure hose hook
according Fig.4.
3.
Slide the trigger gun holder into position of unit left
according Fig 5.
4.
Slide the power cord hook into position of unit right
according Fig.6.
5.
Install
the trigger gun protector
according Fig.7.
6.
Install
the spray wand
according Fig.
10
.
•
Fit the spray wand into the gun and rotate it until the two parts are completely
locked.
7.
Connect the high pressure hose to the trigger gun
according Fig.
11
.
•
Connect the sliver end of the high
-
pressure hose to the trigger gun and twist the
nut as indicated to secure the connection.
IMPORTANT! Only use water without any impurities.
If there is a risk of running sands in the inlet water (i.e. from your own well), an
addi
tional filter should be mounted.
