CLEANING OF LANCE NOZZLE
A clogging up in the nozzle causes a pump pressure which is too high. This is why cleaning is required
immediately (Fig.11).
1.
Stop the machine and disconnect the lance nozzle from the spray handle.
2.
Clean the nozzle.
IMPORTANT:
The cleaning tool should only be used when the spray lance is
detached!
3.
Flush the spray lance backwards with water.
CHECKING OF WATER INLET FILTER
The inlet filter must always be fitted inside the water inlet pipe to filter out sand, lim
estone and
other impurities, as they will damage the pump valves.
Clean the water inlet filters regularly once a month or more frequently is according to use.
Periodically check the
filter in order to prevent clogging, which could jeopardize operation of the
pump (Fig.10). To do this, unscrew the connection coupling for the water inlet hose from the device
and clean the exposed inlet sieve by pl
acing it under running water.
CAUTION:
Failure to fit the filter will invalidate the guarantee.
CLEANING OF MACHINE VENTS
The machine should be kept clean so as to let cooling air pass freely through the machine vents.
STORAGE
Pump, hose and accessories
should always be emptied of water prior to storing as follows.
1.
Stop the machine (press the ON/OFF switch) and detach water hose and accessory.
2.
Restart the machine and activate the trigger. Let the machine run until no move water runs
through the spray handle.
3.
Stop the machine, unplug and detach high pressure hose.
4.
Long periods of nonuse: if the machine is going to be stored for longer periods of time (i.e. over
three months) in a
room where frost could develop, it is recommended that the machine be
filled with an antifreeze solution (similar to the antifreeze solutions used for vehicles).
5.
When the device is not used for an extended period of time, lime deposits begin to form in the
motor pump, which in turn can lead to starting difficulties.
NEVER START UP A FROZEN MACHINE.
Frost damages are not covered by the guarantee!
ENVIRONMENTAL PROTECTION - DISCARDING THE MACHINE
Make the old cleaner unusable immediately: unplug the cleaner and cut the electric cable.
Store the machine in an area that cannot be reached by children.
Do not use any parts from the used machine as replacement parts.
Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging
should be sorted, taken to the local recycling center and di
sposed of in an environmentally safe way.
This product bears the selective sorting symbol
for waste electrical and electronic equipment
(WEEE).
This means that this product must be handled pursuant to European Directive 2002/96/EC in order to
be recycled or dismantled
to minimize its impact on the environment.
For further information, please contact your local or regional authorities.
Electronic products not included in the selective sorting process are potentially dangerous for the
environment and human heath due to th
e presence of hazardous substances.
When replacing old appliances with new ones, the retailer is legally obligated to take back your old
appliance for disposals at least free of charge.
11
