Patriot PT-G24-M, Installation & Operation Manual

Page: 5 / 16

5
TO AVOID SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE:
·
ALWAYS install equipment in a work area with adequate light and space.
·
ONLY operate on a solid, level, nonskid surface that is nonflammable and away from sinks and water
hazards.
·
NEVER bypass, alter or modify this equipment in any way from its original condition. Doing so may create
hazards and will void warranty.
GAS and GAS PRESSURE
Installation must conform with the National Fuel Gas Code, ANSI Z223.1/NFPA
54, the National Gas Installation Code, CSA-B149.1, or the Propane Installation
Code, CSA-B149.2 as applicable and in accordance with local codes.
The appliance and it’s individual shutoff valve (to be supplied by user) must be
disconnected from the gas supply piping system during any pressure testing of
that system at test pressures in excess of ½ psi (3.45 kPa).
These models are designed, built, and sold for commercial use only.
UNPACKING
Unpack the Griddle immediately after receipt. Remove the gas Griddle from the crate; remove all packaging
on and surrounding the unit and be certain to remove all protective plastics and residues from all surfaces.
Make sure that all parts provided including the L.P. gas conversion kit are located. Equipment must have the
legs properly installed before use.
If the machine is found to be damaged, save the packaging material and contact the carrier within fi ve (5)
days of delivery. Immediately contact vender or your local dealer of the equipment. You have no recourse
to damage after fi ve (5) days.