Troubleshooting
Symptom
Solution
Discharge chute difficult to lower and/or raise
Adjust the mounting bolts
Feed gate raises and lowers slowly
Clean any debris that may be in the guide
Adjust the mounting bolts for the raise/lower handle
Feed Gate Actuator Models – gate is slow or doesn’t
move at all
Check the battery, is it fully charged?
Has the fuse blown?
Check the transformer.
Are the switches working?
Check wire connections.
Clear debris from gate track.
Is the actuator working properly?
No feed is flowing
Tap on the bottom of the hopper.
Is the hopper empty?
Service and Maintenance
To ensure the proper operation of the Gravity Tender:
Clean the hopper out periodically to prevent build-up of feed debris
Charge the battery periodically
Check the wheel bearings for end play.
Clean and repack the wheel bearings
o
Performed annually
Check the operation of lights if equipped before each use.
Check the operation of brakes if equipped before each use.
Lubricate any pivot points and slides.
Inspect the pressure in the tires before operation.
Inspect the hitch before operation to ensure that it couples correctly and securely
Storage
If the Gravity Tender is to be stored for an extended period of time:
Clean out the hopper.
If equipped with a battery, disconnect the battery
Clean the Gravity Tender and perform touch up painting to prevent rust or any corrosion
Inspect and repack the wheel bearings so that the Gravity Tender is ready to go for the next season.
Gravity Tender V1.0
39
