Page 6
1.
Disconnect power to the fixture by turning off the circuit breaker or by removing the
fuse at the fuse box. Wait a few minutes for the fixture to cool down.
2.
Remove the GLASS SHADE by twisting it off from the HOOD.
3.
Remove the large HEX NUT located in the BACK PLATE. The HOOD INTERIOR will
drop down, giving you access to the hex nuts and screws attaching the LED PLATE.
Remove the LED PLATE. Be sure not to touch the LEDs.
4.
Disconnect the driver from the LED plate using the QUICK CONNECTOR.
5.
Remove the electrical tape and WIRE NUTS attaching the DRIVER WIRES TO THE
FIXTURE WIRES.
6.
Unscrew the DRIVER from the HOOD and replace with a new driver.
7.
Reconnect the black DRIVER WIRE to the black FIXTURE WIRE and the white
DRIVER WIRE to the white FIXTURE WIRE using WIRE NUTS and secure using
electrical tape.
8.
Connect the new DRIVER to the LED plate using the quick connector. Bundle the
wires behind the LED PLATE then reattach the LED PLATE to the HOOD INTERIOR
with the hex nuts and screws.
9.
Thread the NIPPLE and large HEX NUT to the BACK PLATE and tighten until the
HOOD and BACK PLATE are secure.
DRIVER REPLACEMENT:
WALL
PLATE
NIPPLE
QUICK
CONNECTOR
HOOD
WIRE
NUTS
FIXTURE
WIRES
DRIVER
WIRES
LED
PLATE
DRIVER
HOOD
INTERIOR
HEX NUT
