Page 5
ASSEMBLY AND INSTALLATION (CONT.):
7. After installing the fixture, caulk the upper 2/3s of the WALL PLATE to the mounting
surface. Leave the bottom 1/3 un-caulked to allow for drainage of any water that might
leak into the enclosure. The manufacturer recommends a non-drying exterior caulking
material. A good example is a clear silicone rubber sealant for exterior use.
8. RESTORE POWER AT THE CIRCUIT BREAKER. Turn on the wall switch.
FIG. 1
OUTLET
BOX
MOUNTING
BRACKET
HEX
NUTS
MOUNTING
SCREWS
FIXTURE
SCREWS
WALL
PLATE
LOCK
NUTS
SUPPLY GROUND
WIRE
WHITE
SUPPLY WIRE
BLACK
SUPPLY WIRE
WIRE
NUTS
WHITE
FIXTURE WIRE
BLACK
FIXTURE WIRE
FIXTURE GROUND
WIRE
