5
ASSEMBLY INSTRUCTIONS
2
1
2. Loosen all four mounting bracket screws located on the
mounting bracket and completely remove the two screws
from the round holes in the canopy. Save the screws for
later. Remove the canopy from the mounting bracket.
Then, install the mounting bracket to the outlet box (sold
separately) using the screws and washers provided with
the outlet box.
WARNING:
To reduce the risk of fire, electric shock,
or personal injury, mount to the outlet box marked
“acceptable for fan support” and use the mounting screws
and washers provided with the outlet box.
3. Remove the three fitter plate screws and the packing
material. Discard the packing material from the top and
bottom of the fan assembly but save the three fitter plate
screws for later.
4. Remove the 24 motor screws preassembled to the
motor and save for blade attachment.
4
Mounting
Bracket Screw
Packing
Material
Packing
Material
Motor Screw
3
1.Turn OFF the electrical power at the main fuse or circuit
breaker.
DANGER:
Failure to disconnect the power supply prior to
installation may result in serious injury or death.
